The stainless steel embossed plate is a pattern in which the surface of the steel plate is uneven, and is used for a place where smoothness and ornamental are required. The embossing is rolled by a patterned work roll, and the work rolls are usually processed with an erosive liquid, and the depth of the unevenness on the plate varies depending on the pattern.
Generally, the stainless steel embossed metal decorative column is composed of a skeleton, a base plate and a decorative panel.
1. The practice of skeleton
The skeleton has two kinds of wood structure and steel structure. The wooden structure skeleton is made of square wood and is mainly used for affixing various colored stainless steel plate decoration materials. The steel structure skeleton is made of angle steel welded or threaded joints. This structure is a decorative board for aluminum alloy sheets. Taking the concrete square column as an example, let's briefly talk about the skeleton: firstly, the vertical skeleton is positioned by the embedded part, the connection between the horizontal and vertical frames, and the support of the skeleton and the cylinder, the diameter of the circular column. Need to be determined.
2. Fixation of the base board
The function of the base plate is to increase the rigidity of the column frame and facilitate the laying of the decorative panel. It is generally made of plywood, wood board or MDF, and the base board is directly fixed to the frame with nails or screws. The base plate must have a smooth surface and high dimensional accuracy to ensure the installation quality of the colored stainless steel decorative surface, which is required for the case of wrapping the cylinder.
3. Installation of color stainless steel embossed plate
In the installation and fixing of embossed stainless steel plate decoration materials, it is usually glued and nailed. It is not suitable for welding, because the high temperature of welding will destroy the colored film on the surface and eventually affect its appearance; In particular, the color stainless steel mirror panel has a mirror surface. If it is a single color, the weld will leave an indelible stain, which will lose the overall decorative effect; therefore, the welding method using this material decoration is relatively rare. Among them, the gluing method is easy to operate and thus the most widely used. The nailing method is easy and firm to install, but the decorative surface is also affected. Regardless of which installation is used, it is necessary to accurately cut the sheet.
